[OSX] Setup issues and cannot connect to ummServer

Post any feedback, problems and bugs from the Pre-Alpha releases here.

Moderator: Spudsdude

Re: [OSX] Setup issues and cannot connect to ummServer

Postby Seviliano » Fri Feb 05, 2010 12:40 pm

Hey Spuds,

What I have done so far:

1. created a new file called User/programme/Test/572x
2. extracted into this file only osx debug2.7z (acc. to _BuildInfo.xml may this become new version 574 and should replace the old Version 572??)
4. opened terminal and changed directory to User/programme/test/572x
5. opened Client.exe with command mono -- debug ummClient.exe to create a new (empty) config.xml
6. made selection without server (other option will cause a crash),closed the Client afterwards
7. opened the config.xml and added manually from my media-volume one path as folder and one path as file
8. opened Client.exe with command mono -- debug ummClient.exe again
9. the new movies loaded by button Load / Scan for Movies (Picture 1)
10. the correct movies appear in the selection list on the left side, but not all of previous scan infos are on the display (Picture 2)
11. Change to other movie shows the same in-complete result (Picture 3)
12. Next change to other movie brought up complete information on the display (Picture 4)
13. Try to re-scrape with button Scrape using IMDb with result of total crash ( see information from terminal - Textfile)

Regards


Seviliano
Attachments
picture 4.tiff
picture 3.tiff
picture 2.tiff
picture 1.tiff
Terminalreport 2010-02-05.rtfd.zip
(2.53 KiB) Downloaded 99 times
Seviliano
New Member
New Member
 
Posts: 13
Joined: Wed Jan 20, 2010 4:45 pm

Re: [OSX] Setup issues and cannot connect to ummServer

Postby Seviliano » Fri Feb 05, 2010 12:50 pm

maybe the log-file can give you a hint
Attachments
2010.02.05.log
(163.32 KiB) Downloaded 98 times
Seviliano
New Member
New Member
 
Posts: 13
Joined: Wed Jan 20, 2010 4:45 pm

Re: [OSX] Setup issues and cannot connect to ummServer

Postby Spudsdude » Sat Feb 06, 2010 1:30 am

Ok, I've narrowed down where it's failing.

Try this version, it's still going to fail, but it'll output what it's doing when it fails (hopefully)

Extract to the same folder as the last debug version, run with mono --debug ummClient.exe, when it starts choose local mode.

Try to scrape again, when it bombs out, pastebin or attach the command line output (which should have a bunch more information)
Attachments
osx debug3.7z
(4.06 MiB) Downloaded 106 times
User avatar
Spudsdude
Team umX Developer
Team umX Developer
 
Posts: 440
Joined: Fri Sep 04, 2009 9:06 pm

Re: [OSX] Setup issues and cannot connect to ummServer

Postby Seviliano » Sat Feb 06, 2010 2:17 pm

Here are the latest results.
Have made a new file with two examples. One folder version and one file version. Scraping does start and stops with a crash.
If more information is required please ask.
Attachments
2010.02.06 Kopie.log
(1.76 KiB) Downloaded 121 times
Terminal2010-02-06.rtfd.zip
(2.4 KiB) Downloaded 111 times
Seviliano
New Member
New Member
 
Posts: 13
Joined: Wed Jan 20, 2010 4:45 pm

Re: [OSX] Setup issues and cannot connect to ummServer

Postby Spudsdude » Sun Feb 07, 2010 2:09 am

I'll dig into it on Monday to try to isolate the issue, it's something with mono and the binding of the result data to the form for selection.

I'm gearing up for the super bowl, lots of hot wings and food to start up :D
User avatar
Spudsdude
Team umX Developer
Team umX Developer
 
Posts: 440
Joined: Fri Sep 04, 2009 9:06 pm

Re: [OSX] Setup issues and cannot connect to ummServer

Postby Spudsdude » Wed Feb 10, 2010 1:35 am

Please try this one, just extract over the other builds

please provide the same files (console output, screen captures) as with the other builds
Attachments
umm_osx_debug1.0.0.578.7z
(3.91 MiB) Downloaded 113 times
User avatar
Spudsdude
Team umX Developer
Team umX Developer
 
Posts: 440
Joined: Fri Sep 04, 2009 9:06 pm

Re: [OSX] Setup issues and cannot connect to ummServer

Postby Seviliano » Wed Feb 10, 2010 7:09 pm

Installed the latest build over the prvious and added 3 different options:
1. just one Movie as folder with no other data (option 1)
2. Movie as file also with no information
3. Movies as folder with alredy scraped Information (option 3)

Results: as per screenshot:
1. first set up with above option 3 screenshot no 1 (no complete information)
2. second set up of other movie also option 3 screenshot 2 ( complete information)
3. Try to re-scrape option 3 with IMDb, screenshot 3, Information to select movies pos up but no chance to activate the button select. Have terminated the action, due to frozen screen.
4. Scraping of above option 1 does have the same result. Process must be terminated

Attached please find log-file and a copy the terminal.

Please note that the log file has been created by a new file which covers only latest version of umm. In case this version will be installed over the previous there is no logfile with todays date.


Regards


Seviliano
Attachments
2010.02.10.log
(1.76 KiB) Downloaded 99 times
4 scraping of new movie.tiff
3 Rescraping viaIMDb.tiff
2 second set up.tiff
1 First set up.tiff
Terminal 2000-02-10.rtfd.zip
(1.88 KiB) Downloaded 105 times
Seviliano
New Member
New Member
 
Posts: 13
Joined: Wed Jan 20, 2010 4:45 pm

Re: [OSX] Setup issues and cannot connect to ummServer

Postby Spudsdude » Wed Feb 10, 2010 8:57 pm

hmm.. not sure why the UI is showing up with all the errors, but i'm guessing that this is the cause of the issue.

See if the downloader will display
Does UMM hang when you click on the downloader button (top of test form)?

Try removing the bundled .dll's that are mono files
Remove the following files from the umm folder
System.Drawing.dll

If it still fails, remove all the mono files (one by one) and see if it'll open and display correctly
Here are the files that UMM must have to open
ummClient.exe <-- This is the dev test form
umm.dll <-- this is the UMM Core
sqlite3-osx-x86.bin <-- Database
SQLite3.dll <-- Database
remoteAPI.dll <-- RemoteAPI
Mono.Data.Sqlite.dll <-- Database

for scraping
ICSharpCode.SharpZipLib.dll <-- Compression Library
TechNuts.dll <-- Scraper Library
System.Xml.dll <-- Used by Scraper Library
System.Xml.Linq.dll <-- Used by Scraper Library

This is where I really wish i had a Mac to test under, We might have to wait for another dev to chime in or another Mac user
User avatar
Spudsdude
Team umX Developer
Team umX Developer
 
Posts: 440
Joined: Fri Sep 04, 2009 9:06 pm

Re: [OSX] Setup issues and cannot connect to ummServer

Postby Seviliano » Fri Feb 12, 2010 6:46 pm

Kicked out all possible files as recommended, but the result remains the same as before.
Changed to notebook and installed the latest version and followed the same story as done with mini-mac.
After that I renewed the installation with two movies only on HD (personal movie file).
These movies had been added via the ConfigEditor easily. Scraping via IMDb (with movie-title only) - no result. After the IMDb ID had been added (Information was saved) I started the scraper. Information to select movie popped up, selection was possible but the result still shows no information in the UI.
But I was very surprised - some files (.fxd/mp4.properties and .nfo) had been scraped to the movie-folder even these data are not able to be displayed on the UI.

In case any screenshots are required tell me whats needed.

I am concerned about the information of terminal which indicates OS is not windows, when the Client.exe has been started. But may be this is quite normal, due to mono has not been stated yet with any command.


Regards



Seviliano
Attachments
2010.02.12.log
(17.91 KiB) Downloaded 114 times
Seviliano
New Member
New Member
 
Posts: 13
Joined: Wed Jan 20, 2010 4:45 pm

Previous

Return to Pre-Alpha

Who is online

Users browsing this forum: No registered users and 1 guest

cron